No.
| No. of ГОСТ Standard
| Name of Standard
| Time of introduction
|
1
| 9702-87
| Lifting-plug and ball cocks. Main parameters.
| |
2
| 14187-84
| Lifting-plug cocks. Factory lengths.
| |
3
| 21345-78
| Lifting-plug, ball and cylindrical cocks for Ру 16 MPa. General technical requirements.
| |
4
| 28343-89
(ИСО 7121-86)
| Steel flange ball cocks. Factory lengths
| |
5
| 28908-91
| Ball cocks and disk gates. Factory lengths
| |
6
| 24570-81
| Safety valves for steam and hot water boilers.
| |
7
| 3326-86
| Shutof valves, check valves and gates. Factory lengths
| |
8
| 9697-87
| Shutoff valves. Main parameters.
| |
9
| 28291-89
| Shutoff valves for heat power plants. Types and main parameters.
| |
10
| 5761-74
| Valves for nominal pressure of Ру 25 MPa. General technical specifications
| |
11
| 27477-87
| Check valves. Main parameters
| |
12
| 11823-91
| Check valves for nominal pressure of РN 25 MPa. General technical specifications
| |
13
| 16587-71
| Safety and regulating valves and pressure regulators. Factory lengths
| |
14
| 12532-88
| Direct acting safety valves. Main parameters
| |
15
| 9789-75
| Spring safety valves, high-lift flange steel for Ру 1.6 and 4.0 MPa. Technical specifications
| |
16
| 23866-87
| Single-seat, double-seat and cell regulating valves. Main parameters
| |
17
| 12893-83
| Single-seat, double-seat and cell regulating valves. General technical specifications
| |
18
| 3706-93
| Flaps. Factory lengths
| |
19
| 5762-74
| Flaps for nominal pressure of Ру?25 MPa. General technical specifications
| |
20
| 5762-2002
| Flaps for nominal pressure of Ру ≤25 MPa
| |
21
| 9698-86
| Flaps. Main parameters
| |
22
| 22445-88
| Check gates. Main parameters
| |
23
| 13252-91
| Check gates for nominal pressure of Р 25 MPa. General technical specifications.
| |
24
| 12521-89
| Disk gates. Main parameters
| |
25
| 13547-79
| Swing disk gates for Ру up to 1.6 MPa. General technical specifications
| |
26
| 25923-89
| Regulating disk gates. Main parameters.
| |
27
| 12678-80
| Direct acting pressure regulators. Main parameters
| |
28
| 22223-76
| Shutoff devices for pressure gauges. Main parameters
| |
29
| 12547-76
| Level gauges with shutoff device. Types and parameters.
| |
30
| 22642-88
| Hose pipeline valves. Main parameters
| |
31
| 24990-81
| Pipeline valves with protective coating. Main parameters
| |
32
| 27581-88
| Glass valves. Main parameters
| |
33
| 22309-77
| Pipeline valves. Electric actuators. Main parameters
| |
34
| 22413-89
| Pipeline valves with solenoid actuator. Main parameters
| |
35
| 14715-88
| Vacuum valves. Types. Main parameters.
| |
36
| 9544-75
| Shutoff pipeline valves. Norms of closure hermeticity.
| |
37
| 28289-89
| Check valves for heat power plants. Types and main parameters.
| |
38
| 12.2.063-81
| ССБТ. Industrial pipeline valves. General safety requirements.
| |
39
| 4666-75
| Pipeline valves. Marking and distinctive colouring
| |
40
| 9544-93
| Shutoff pipeline valves. Norms of closure hermeticity
| |
41
| 24856-81
| Industrial pipeline valves. Terms and definitions
| |
42
| 4.114-84
| СПКП. Industrial pipeline valves. Range of main indicators.
| |
43
| 26304-84
| Industrial pipeline valves for export. General technical specifications
| |
44
| 28338-89
| Pipeline and valve junctions. Port areas (nominal sizes). Series.
| |
45
| 22512-77
| Steel male and female flanges for Ру up to 6.4 MPa and Ду up to 300 mm. Mounting dimensions
| |
46
| 12815-80
| Flanges of valves, fittings and pipelines for Ру from 0.1 to 20.0 MPa. Types. Mounting dimensions and dimensions of sealing surfaces.
| |
47
| 12816-80
| Flanges of valves, fittings and pipelines for Ру from 0.1 to 20.0 MPa. General technical requirements.
| |
48
| 12817-80
| Cast flanges from grey cast iron for Ру from 0.1 to 1.6 MPa. Design and dimensions
| |
49
| 12818-80
| Cast flanges from malleable cast iron for Ру for 1.6 to 4.0 MPa. Design and dimensions
| |
50
| 12819-80
| Steel cast flanges for Ру from 1.6 to 20.0 MPa. Design and dimensions
| |
51
| 12820-80
| Plane welded steel flanges for Ру from 0.1 to 2.5 MPa. Design and dimensions
| |
52
| 12821-80
| Edge-to-edge welded steel flanges for Ру from 0.1 to 20.0 MPa. Design and dimensions
| |
53
| 12822-80
| Loose steel flanges on welded ring from Ру from 0.1 to 2.5 MPa. Design and dimensions
| |
54
| 9399-81
| Threaded steel flanges for Ру 20-100 MPa (200 -1000 kgf/cm²). Technical specifications.
| |
55
| 4433-76
| Ship flanges of valves, fittings and pipelines. Types.
| |
56
| 5260-75
| Cast iron flywheels for pipeline valves. Types, main dimensions and technical requirements
| |
57
| 6527-68
| Coupling ends with cylinder pipe thread. Dimensions
| |
58
| 15180-86
| Flat elastic gaskets. Main parameters and dimensions
| |
59
| 21557-83
| Hubs and joint rings for metal bellows. Technical specifications
| |
60
| 21744-83
| Multilayer metal bellows. Technical specifications
| |
61
| 4.124 -84
| Reducers, motor-reducers, variable speed drives and motorized conveyor drums. Range of indicators.
| |
62
| 977-88
| Steel castings. General technical specifications.
| |
63
| 26645-85
| Steel and metal castings.
| |
64
| 19200-80
| Cast iron and steel metals. Terms and defect definitions.
| |
65
| 1759.0-82
| Bolts, screws, pins and nuts. Technical specifications.
| |
66
| 1759.1-82
| Bolts, screws, pins, nuts and cap screws. Allowable tolerances, methods of dimensions and deviations in shape and surfaces arrangement control.
| |
67
| 31759.2-82
| Bolts, screws and pins. Surface defects and control methods.
| |
68
| 3033-79
| Hinged bolts. Design and dimensions.
| |
69
| 23304-78
| Bolts, pins, nuts and washers for flange couplings of nuclear power units.
| |
70
| 5272-68
| Corrosion of metals. Terms.
| |
71
| 5632-72
| High-alloy steels and corrosion-resistant, heat-resistant and refractory alloys. Grades.
| |
72
| 6130-71
| Metals. Methods of heat resistance determination.
| |
73
| 9012-59
| Metals and alloys. Method of Brinell hardness measurement.
| |
74
| 6996-66
| Welded joints. Methods of mechanical properties determination.
| |
75
| 8479-70
| Forgings from structural carbon and alloyed steel. General technical specifications.
| |
76
| 9567- 75
| Steel precision pipes. Range.
| |
77
| 11017-80
| Steel seamless high-pressure pipes. Technical specifications.
| |
78
| 11472-69
| Allowable tolerances and seats. Accuracy classes 02-09.
| |
79
| 15066-78
| Foundry molding machines. Accuracy norms.
| |
80
| 19521-74
| Metal welding. Classification.
| |
81
| 21027-75
| Power systems. Terms and definitions.
| |
82
| 15.309-98
| System of products development and delivery to production. Testing and acceptance of manufactured products. Fundamental provisions.
| |
83
| 15.000-82
| System of products development and delivery to production. General provisions.
| |
84
| 26279-84
| Heat stations on organic fuel. General requirements for acoustic protection.
| |
85
| 26691-85
| Heat-and-power engineering. Terms and definitions.
| |
86
| 15.311-90
| Products’ introduction as based on foreign companies’ technical documentation.
| |
87
| 15.001-88
| Products for industrial engineering purposes.
| |
88
| 19.201-78
| Performance specifications. Requirements to contents and execution.
| |
89
| 356-80
| Nominal, test and operating pressures. Series.
| |
90
| 17375-2003
(ИСО 3419-81)
| Seamless welded pipeline parts from carbon low-alloy steel. Knuckle bands, type 3D.
| |
91
| 17376-2003
(ИСО 3419-81)
| Seamless welded pipeline parts from carbon low-alloy steel. T-bends.
| |
92
| 17378-2003
(ИСО 3419-81)
| Seamless welded pipeline parts from carbon low-alloy steel. Swages.
| |
93
| 17379-2003
(ИСО 3419-81)
| Seamless welded pipeline parts from carbon low-alloy steel. Elliptic plugs.
| |
94
| 17380-2003
(ИСО 3419-81)
| Seamless welded pipeline parts from carbon low-alloy steel. General technical specifications.
| |
95
| 30753-2001
(ИСО 3419-81)
| Seamless welded pipeline parts from carbon low-alloy steel.
Отводы крутоизогнутые типа 2D.
| |
96
| 7.60-90
| Publications. Main types. Terms and definitions.
| |
97
| 7.22-80
| Industrial catalogues. General requirements.
| |
98
| 2.114-95
| Unified system of design documentation. Technical specifications.
| |
99
| 20911-89
| Engineering diagnostics. Terms and definitions.
| |
